3U RACK MOUNT for ICOM R7000/R8500/R70/R71/IC271/IC471/IC1271/IC740 With Speaker

Description

3U (5 ¼" high) RACK MOUNT for Icom R70, R71A, R7000, R85000 Receivers or IC740, IC271, IC471, IC1271 and similarly sized transceivers with speaker only.   You can have us add a microphone clip, just ask!
NovexComm - 1(310) 534-4456
M-F 10 a.m.-6 p.m. Pacific Time (west coast)
This auction is for one new rack mount with speaker, designed to work with the Icom R70, R71A, R7000, R85000 receivers and Icom IC740, IC271, IC471 and IC1271 transceiver radios of the same physical size.  The rack panel is 3 Rack Units (5.25 inches, 13.32cm) high by 19 inches wide (EIA Standard rack panel) - it is also available (on special order) in 23 inch (58.4 cm) width (actually any width up to 120 inches).  If you need something custom we can do it; please ask!   The radio opening is 11.25" wide, 4.375" high.  This panel does
not
fit the R7100 - but we have one that will, please contact us. The radio shown is not included in this auction.
These rack mounts were originally designed for and many have been sold to the US Government: NSA, FBI, US Military: Army, Navy, Air Force, Coast Guard plus several other organizations and agencies.
You can order an optional 15, 20 or 30 Amp power supply that comes pre-mounted to the tray, complete with a line cord and strain relief.   The 15 and 20 amp supplies are the same size (see the photos) and are 110-120 volts 50/60 Hz only. The 30 amp supply is switchable between 110-220 volts 50/60 Hz so it works just fine on worldwide power sources.
Take a look at the other photos
; they show some of the optional features and gadgetry Novexcomm offers to the radio community including rear I/O panels, clock modules (really DC voltmeter / clock / temperature gauge), LED backlighted text bars (think about how YOUR agency name or call sign will look here!) and more. Of course this stuff is all optional and built to your specs; check out our capabilities!
The tray (or shelf if you prefer) is normally steel (for strength) but can be ordered in aluminum for more if you like to conserve weight in a Go Box perhaps; something to think about. Both are 14" deep but can be cut down to order if you have a need for a more shallow depth.
The PANEL can be mounted to the TRAY at the corners using our custom corner brackets (optional).
Once a radio is in a rack cabinet there is very little sound from a internal side-mounted or top-mounted internal speaker so you will need some sort of external speaker and this rack mount comes with it built-in with a cord terminated in a 1/8 inch / 3.5mm plug. The speaker simply plugs into the external speaker jack on your radio.
We also offer speaker rack panels with 2, 3, 4 or 6 speakers. Each speaker comes with a two-conductor cable with a 1/8 inch (3.5mm) plug that goes into the external speaker jack on rear panel of the radio.
The radio opening is 11.33" wide, 4.44" high. Yes, we are using a photo of a IC-746, only because we don't have one of every radio lying around for photos.   If you have any questions or doubts then please email us or CALL us first with any questions and we will help you make it work your way!
This rack mount was designed for static installations and should have rear support when used in a "Go-box" or other portable / mobile situation.
Novexcomm makes standard and custom rack mounts for any need and almost any radio.
Use any browser to look up Novexcomm...
We do rack mounts and Go-Boxes your way!
EMAIL, TELEPHONE QUESTIONS, AND QUOTE REQUESTS ARE ALWAYS WELCOME.
Use any search engine and connect with us, 10 a.m. to 6 p.m., Pacific Time (west coast), just search for NOVEXCOMM or Bob Burchett WB6SLC (good at QRZ). Call us!
If you are going to email us please include your name, phone number, and callsign
in the body
of your email.
We can make panels for most anything here at Novexcomm - We have it all and if we don't we can custom make if for YOU! Give us a try!
If you have any special needs like portable (Go-Box) or mobile operation be sure to give us a call first to discuss how we can make it work for you.
Please see our eBay store for all of our other stock rack mounts.  Don't forget we can custom make a panel for YOU, call us!
Our rack panels are made from 0.125 (1/8 inch) aluminum, have a semi-gloss (satin) black baked finish and are made in the USA!
Shipping and handling via Ground in the US lower 48 states, other destinations will be quoted upon request. Prices quoted do not include shipping.
We combine items when possible to save you shipping money!
We offer the eBay Global Shipping Program and ship anywhere. We have customers worldwide.
Silly disclaimers we have to say: Any radios, tuners, accessories, etc. shown are not included in this auction.  We can't afford to have a sample of every radio ever made sitting around here just for photos so many of our images are Photoshopped. Some of them aren't even of the right  radio; in some cases we put a photo of a similar radio there just to give you an idea of what our rack panel will look like when you mount your radio into it.